Have questions? SBM sales representatives are available for live chat now WELCOME TO SBM MACHINERY!

Belt Feeder For Clinker Cement

Belt Feeder For Clinker Cement

Belt Feeder For Clinker Cement

In the production process, the Clinker Cement Belt Feeder can uniformly and regularly and continuously feed the block and granular materials from the storage bin to the receiving device, which is widely used in metallurgy, coal mining, mineral processing, building materials, chemicals, abrasives, etc.

Clinker Cement Belt Feeder Structure

The Clinker Cement Belt Feeder is composed of a vibration frame, a vibrating body, a vibration motor, a vibration exciter, a spring (the spring is divided into an excitation spring and a support spring).

1-Flexible Sealing Cover 2-Resonant Body 3-Bracket 4-Activation Cone 5-Excited Spring 6-Exciter 7-Vibration Motor 8-Spring Balancer 9-Flexible Seal Cover 10-Outlet Tube 11-Support Spring

Clinker Cement Belt Feeder Working Principle

The Clinker Cement Belt Feeder uses the eccentric mass in the vibrator to generate centrifugal force, and makes the moving part of the sieve box, the vibrator and the like a forced continuous circular or nearly circular motion. The motor drives the driving shaft through the V-belt, and then the driving shaft is driven by the motor. The gear meshes with the passive shaft, and the main and passive shafts rotate at the same time, so that the tank body vibrates, so that the material continuously flows to achieve the purpose of conveying materials.

The Reason Why The Clinker Cement Belt Feeder Feeds Slowly

1. The Chute Is Not Inclined Enough

Solution: Adjust the installation angle. Select the height/lower fixed position of the Clinker Cement Belt Feeder according to the site conditions.

2. The Angle Between The Eccentric Blocks At Both Ends Of The Vibration Motor Is Inconsistent

Solution: Adjust by checking if the two vibration motors are consistent.

3. Vibration Motor Vibration Direction Is Consistent

Solution: It is necessary to adjust the wiring of any one of the vibration motors to ensure that the two motors are operated in reverse to ensure that the vibration track of the Clinker Cement Belt Feeder is straight.

4, Vibration Motor Excitation Force Is Not Enough

Solution: Adjust the position adjustment of the eccentric block (the adjustment of the excitation force is achieved by adjusting the phase of the eccentric block. The two eccentric blocks are fixed and the other is movable, and the loose movable eccentric block bolt can be used. When the phase of the eccentric block coincides, the excitation force is the largest and decreases in turn; when adjusting, the phase of the eccentric block of the same group of motors should be consistent.

Clinker Cement Belt Feeder Installation And Maintenance

  • 1. In the Clinker Cement Belt Feeder, it is used for batching and quantitative feeding to ensure uniform and stable feeding, and to prevent the material from self-flowing to be installed horizontally.
  • 2. The Clinker Cement Belt Feeder after installation should have a horizontal clearance of 20mm, and the suspension device should be flexible.
  • 3. Before the empty test, all the bolts should be tightened once, especially the anchor bolts of the vibration motor. It should be tightened once for 3-5 hours.
  • 4. When the test is started, the two vibration motors must rotate in the opposite direction, and the stability of current and noise should be stopped in time.
  • 5. The motor bearing is filled with grease once every two months, and the lubricating oil should be filled once a month during the high temperature season.
  • 6. The Clinker Cement Belt Feeder should always check the amplitude during the running process, the current of the vibration motor and the surface temperature of the motor. It is required to have a uniform amplitude before and after, and the vibration motor current is stable. If abnormal conditions are found, it should be stopped immediately.

In production, the failure of the Clinker Cement Belt Feeder may have serious consequences. Regular maintenance and overhaul is an important means to extend the service life of the machine and ensure normal work. We should pay attention to it. The above is for the Clinker Cement Belt Feeder structure, working principle, slow feeding reasons and installation and maintenance. If there are other problems in the Clinker Cement Belt Feeder, please feel free to leave a message.

Get Price And Support

Simply complete the form below, click submit, you will get the price list and a SBM representative will contact you within one business day. Please also feel free to contact us by email or phone. ( * Denotes a required field).