Have questions? SBM sales representatives are available for live chat now WELCOME TO SBM MACHINERY!

China Silica Sand Crusher Machine Market Price

China Silica Sand Crusher Machine Market Price

The Reason For The Sudden Stop Of The China Silica Sand Crusher Machine

The China Silica Sand Crusher Machine is an important equipment in the sand making process, which consists of a feeding hopper, a distributor, a crushing chamber, an impeller body, a spindle assembly, a base, a transmission device and a motor. This article shares with you the seven reasons for the sudden shutdown of the China Silica Sand Crusher Machine and the countermeasures.

1. Blockage Of Material In The Crushing Chamber

The blockage of the material will cause the equipment to suddenly stop, causing the blockage of the material in the crushing chamber of the China Silica Sand Crusher Machine as follows:

  • 1. Feeding is too fast. When the China Silica Sand Crusher Machine is just started, the material to be placed is too large or too hard, which will cause equipment blockage and vibration phenomenon. Therefore, the China Silica Sand Crusher Machine cannot be officially put into production work when it is just started. At the same time, the speed of placing the material is not too fast, otherwise it will lead to blockage.
  • 2. The size of the discharge opening. When the discharge opening of the China Silica Sand Crusher Machine is too small and exceeds the minimum range of the equipment, some large materials will accumulate at the discharge opening of the crushing chamber, resulting in unsmooth discharge and severe crushing chamber. The phenomenon of blockage.
  • 3. Due to the high water content in the crushed material or high viscosity, it will adhere to the outlet of the crushing chamber when the China Silica Sand Crusher Machine is broken, which affects the discharge of the material and causes the blockage. It is recommended that when crushing materials, screening should be carried out first to avoid blockage during work.
  • 4. When the sanding machine is broken or the hammer head is worn or uneven, the crushing force of the hammer head will be reduced. When the hard material is broken, the crushing operation cannot be completed, so that the material is broken unevenly or excessively. Phenomenon and reduce the service life of the hammer. At the same time, if the material is too large, the discharge of the discharge opening will be affected, and if it is serious, the crushing cavity will be blocked.

Responses

If the material in the crushing chamber is clogged, the material needs to be cleaned up. In the subsequent use, materials with large particle size or high water content are prohibited from entering the machine, and the feeding material should be kept uniform to avoid excessive feeding.

2, The V-Belt Is Too Loose

Check if the V-belt is too loose or loses tightness.

Responses

If it is too loose and causes downtime, you need to adjust the tightness of the V-belt. If the V-belt loses tightness due to prolonged use, the V-belt needs to be replaced.

3, The Working Voltage Is Not Suitable

When the working voltage of the production site is too low, it is not enough to stop the normal operation of the China Silica Sand Crusher Machine.

Responses

You need to choose the voltage that meets the requirements of the China Silica Sand Crusher Machine.

4, Internal Parts Fall Off

If the equipment has a metal touch before the machine is stopped, it may be that some parts in the crushing chamber are dropped, causing the sand machine to suddenly stop.

Responses

It is necessary to check the inside of the China Silica Sand Crusher Machine. If the internal parts are detached, it needs to be properly installed.

5, The Impeller Is Stuck

When the inside of the crusher enters a hard object such as metal, it is possible to jam the impeller of the China Silica Sand Crusher Machine, resulting in the device not working.

Responses

It is necessary to strictly control the hardness of the material and prohibit the entry of unbreakable objects.

6, The Main Shaft Is Broken Or The Bearing Is Locked

Responses

If it is caused by a broken spindle, the worn spindle needs to be repaired or replaced.

If it is caused by bearing lock, it is necessary to find out the cause of the lock, to properly install the bearing, to ensure that the bearing has a certain working clearance, and to do the lubrication of the bearing, otherwise the problem cannot be solved fundamentally.

7. There Is A Problem With The Device Cable.

If the connecting line breaks or is in poor contact, the China Silica Sand Crusher Machine will suddenly stop, especially if there is no sound without warning, it is likely that there is a problem with the connecting line.

Responses

If the sander connection line breaks or is in poor contact, it needs to be adjusted or replaced in time.

Get Price And Support

Simply complete the form below, click submit, you will get the price list and a SBM representative will contact you within one business day. Please also feel free to contact us by email or phone. ( * Denotes a required field).