Have questions? SBM sales representatives are available for live chat now WELCOME TO SBM MACHINERY!

Project Report For Conveyor PDF

Project Report For Conveyor PDF

The Reason For The Conveyor Project

Conveyor Project Device Aging

The Conveyor Project runs for a long time, the device wears and ages, and the staff fails to update and adjust the device in time. Improper installation will directly cause different tensions on the sides of the Conveyor Project during operation, and the corresponding frictional force will be different, which will result in Run off. From the actual application situation, the main reason for the uneven force on both sides of the Conveyor Project is caused by the aging of the Conveyor Project device.

Improper Placement Of Materials

During the transfer operation of the Conveyor Project, the position of the material on the Conveyor Project should be even and appropriate. Uneven placement will cause the Conveyor Project to run off during operation. The main reason for the uneven feeding is that the position and direction of the material falling are not correct. If the material is biased to the left, the crushing machine will be biased to the left, and vice versa.

Conveyor Project Joint Problem

The Conveyor Project joints may become uneven due to wear and tear caused by long-term use or joint damage caused by human factors. If the Conveyor Project is not straight or the vulcanized joint is not correct, the tension on both sides of the Conveyor Project will be inconsistent. The Conveyor Project will be deflected to the side with large tension during the running process, and the Conveyor Project joint has the largest deviation angle.

Conveyor Project Deformation Aging, Tension Reduction

If the Conveyor Project is in long-term operation, maintenance and renewal work is not in place, the parts are over-run, the Conveyor Project is aging and slack, and it will gradually produce irreversible deformation and aging, which directly causes the tension to decrease. This will directly cause uneven internal stress and cause the Conveyor Project to run off.

Unbalanced Tension At Both Ends Of The Conveyor Project

The most important bearing mechanism of the Conveyor Project is the Conveyor Project, which is responsible for the material transportation. Therefore, if the quality of the Conveyor Project is not enough or the Conveyor Project is used for a long time, the wear is aging, and the tension at both ends of the Conveyor Project is unbalanced, resulting in deviation. In particular, the Conveyor Project joint or the deviation from the straight position is the most obvious.

Roller And Roller Adhesive

After the Conveyor Project transports the material for a period of time, especially in the transportation of the mineral material, there is often material bonding on the drum or the idler, which causes the thickness of the roller or the roller to increase locally, resulting in uneven force on both sides. Run off. The Conveyor Project is affected by the lateral force of the drum and the idler. If the installation position of the Conveyor Project is offset, the lateral force of the Conveyor Project is inconsistent during the operation of the Conveyor Project. The lateral force is affected by many factors. If there is a large verticality error between the installation position of the supporting roller and the center line or a large verticality error between the roller circumference and the center line, the Conveyor Project will be deflected. Moreover, the deviation of the position where the drum and the roller are installed is most obvious.

Get Price And Support

Simply complete the form below, click submit, you will get the price list and a SBM representative will contact you within one business day. Please also feel free to contact us by email or phone. ( * Denotes a required field).