Shaft Impact Crusher

Abstract

How to improve the productivity of Shaft Impact Crushers When selecting production equipment, the user value is the production efficiency of the equipment, and only the equipment with high production efficiency will be trusted by the …
  • Shaft Impact Crusher
  • Shaft Impact Crusher
  • Shaft Impact Crusher

Service Assurance

Our service commitment is not a slogan but a firm action. To this end, we have established enormous, systematic, and standardized service assurance system to ensure timely and proper handling of each service item.

How to improve the productivity of Shaft Impact Crushers

When selecting production equipment, the user value is the production efficiency of the equipment, and only the equipment with high production efficiency will be trusted by the majority of users. After a large number of case studies, Shibang Industry found that the Shaft Impact Crusher has some inconveniences in the installation design, which can be appropriately improved to improve the productivity of the Shaft Impact Crusher.

Before explaining, let’s take a look at how the Shaft Impact Crusher works: the material enters the Shaft Impact Crusher and is crushed by the impact of the high-speed rotary hammer. The crushed material is hammered from the hammer. The kinetic energy is obtained, and the crushing plate is rushed at a high speed. At this time, the material with large grain size is impacted by the hammer head between the beams, and is broken by grinding, and the small particle size is discharged from the rafters. The user can adjust the purlin gap according to the requirements and change the granularity of the discharge to meet the different needs of different users.

First, the entrance door is improved to a loose-leaf door

The entry door is modified to a loose-leaf door, which ensures that it is not easy to lose some of the smaller particles when the crusher is in operation. If the production efficiency of the output is found to be reduced, it is only necessary to open the loose-leaf door at the time of inspection, which greatly speeds up the inspection progress and ensures the start-up time of the stone-breaking machine.

Second, the correct use of the damper

There are two dampers on each side of the Shaft Impact Crusher. Many newcomers do not know the function of the two dampers. Therefore, the damper is basically in the closed state, which causes the rotor to become stuck if it is too large. The casing is cleaned or solved by the method of dredge clearance, but both methods are time consuming and labor intensive. After long-term work practice, the staff found that the operation of the switch damper can greatly reduce the phenomenon of rotor jam.

Third, adjust the gap between the hammer head and the stringer in time

With the use of the crusher, due to the gradual wear of the hammer and the purlin, the gap between the purlin and the gap between the purlin and the head is getting larger and larger, and the impact force and the crushing pressure of the material in the crusher are reduced. The material discharged from the purlin is coarser in grain size, and the amount of material returned to the Shaft Impact Crusher after being sieved by the vibrating screen is increased, the crushing efficiency is lowered, and the service life of the hammer head is also lowered. In this way, it is necessary to adjust the adjusting screw rod at the lower part of the crusher to drive the eccentric wheel to rotate, and fasten the stringer, so that the gap between the hammer head and the stringer can meet the required requirements and improve the crushing efficiency.

Request a Quotation

Hot Sale

Relation Case