Have questions? SBM sales representatives are available for live chat now WELCOME TO SBM MACHINERY!

Talc Grinding Mill

Talc Grinding Mill

Talc Grinding Mill working process

After the bulk material is crushed to the required particle size by the jaw crusher, the material is sent to the storage hopper by the hoist, and then uniformly fed into the main machine grinding chamber by the vibrating feeder for continuous grinding, and the powder after grinding Taken away by the fan airflow. After being classified by the analysis machine, the fine powder conforming to the fineness enters the large cyclone collector through the pipeline, and is separated and collected, and then discharged into the powder tube to be the finished powder. The airflow is then drawn into the blower by the return air duct at the upper end of the large cyclone collector. The whole airflow system of the machine is closed and circulating, and it circulates under positive and negative pressure conditions.

In the grinding chamber, because the material to be ground has a certain water content, the heat generated during grinding causes the gas in the grinding chamber to evaporate to change the gas flow rate, and the connection of each pipe of the whole machine is not tight, so that the outside air is sucked in, so that the circulating airflow increases. The airflow is balanced by adjusting the residual air duct between the fan and the main engine, and the excess gas is introduced into the small cyclone collector, and the fine powder brought in by the residual gas is collected, and then the upper exhaust pipe of the small cyclone collector is collected. Discharge into the atmosphere or into the dust collector to purify the exhaust air.

The working process of the Talc Grinding Mill main engine is to rotate the central shaft through the transmission device. The upper end of the shaft is connected with the plum blossom frame. The frame is equipped with a grinding roller device and forms a swinging fulcrum, which not only rotates around the center, but also rotates the grinding roller around the grinding ring. At the same time, the grinding roller itself rotates due to friction. The lower end of the plum blossom frame is equipped with a blade system, and the position is at the lower end of the grinding roller. During the same process of the blade and the grinding roller, the material is thrown into the grinding roller ring to form a cushion layer, and the material layer is rotated by the grinding roller. The outward centrifugal force (ie, the squeezing force) crushes the material, thereby achieving the purpose of milling.

The above is the working principle of the Talc Grinding Mill. In fact, the quality of the current mechanical equipment is very guaranteed, but if the equipment is not properly maintained, the equipment will still be damaged, and the service life of the equipment will be reduced. Therefore, after purchasing the equipment, not only the equipment should be operated but also maintained, so that the service life of the equipment can be increased and the production efficiency of the equipment can be increased.

Get Price And Support

Simply complete the form below, click submit, you will get the price list and a SBM representative will contact you within one business day. Please also feel free to contact us by email or phone. ( * Denotes a required field).